PA66GF25 Polyamide Extruder Machine Single Screw For Thermal Barrier Tape
Product Introduction:
What is extruder in polymer processing?
Plastic extrusion is a continuous high volume manufacturing process in which a thermoplastic material is homogeneously melted and then forced out of the shaping die by means of pressure. There are different types of an extruder.
The extruder we sell is single screw extruder for the production of PA thermal barrier profiles.
Processing Technique:
Nylon material → drying → heating → extrusion → stereotype → finished product
Parameters of Single Screw Reactive Extruder
| Production Speed | Around 8-12cm/min |
| Strip Shape | All kinds of shape |
| Raw Material | PA6.6 granules reinforced by 25% glass fiber |
| Cooling | Water Cooling |
| Usage | Produce thermal break strip |
| Type | Plastic extrusion machine |
| Winding Machine | Available |
| Cutting Machine | Available |
| Worktable | Available |
PA66GF25 Polyamide Profiles Extrusion Machine Including:
Machine Characteristic:
1. The barrel is heated by stainless steel heater, withstand voltage 400V
2. The professional dryer makes raw material convection with hot air uniformly, and the drying uniformity is good. Its thermal insulation structure prevents heat dissipation and promotes energy saving.
3. Special new screw make sure the machine has low energy consumption, good plasticizing ability and stable extrusion flow.
4. The extruder uses high-quality carbide twin-screws to ensure high plasticization of PA66GF25 granules
5. One temperature control zone controlled by one table, and the temperature accuracy can be controlled at ±1℃.
Application of polyamide strip
1. Used for thermal break aluminum window, door, curtain and walls
2. Many customer use thermal break aluminum profile to do big air conditioner to keep heat of cold air, then make use of energy saving
Our advantage
The extrusion process also offers an excellent surface finish to parts and gives considerable freedom to form in the design process. Extrusion processes are similar to drawing, which uses the tensile strength of the material to pull it through the die. The drawing process is used to produce wire, bars, tubes and profiles.
Our Service
One to one consulting service
Experienced senior engineer to discuss technical data, designed drawing
Perfect arrangement of sea or air transport
Overseas aftersales service
Professional engineers team
Welcomed to visit the factory at any time
Choosing Polywell means choosing the certainty of a reliable partner, able to team up and offer daily support. We are where you need us, whenever you need us.
Production Time
30-38 working days after receiving the deposit
Payment
50% T/T before production, 50%T/T before shipment
Our Factory
Please feel free to contact us if you have any questions.
Camille
E-mail: camille@szpolywell.cn
Tel:86-13584481777
Product Tags:
|
|
PA66 GF25 Nylon Polyamide Extruder Machine Single Screw For Thermal Barrier Tape Images
|
